Shure 565s Dynamic Mic

The 565 Series microphones are dual-impedance, unidirectional dynamic microphones with a strong, wire-mesh, spherical front grille that contains a highly effective wind and pop filter. Connected for low-impedance Operation, 565 Series microphones provide excellent vocal or speech reproduction on lecterns and stages, and are a popular choice for use in public auditoriums, churches, convention halls, and schools.

• Type : Dynamic

• Frequency Response : 50 to 15,000 Hz

• Polar Pattern : Cardioid (unidirectional)�uniform with frequency, symmetrical about axis

• lmpedance : Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and �High� for connection to high-impedance microphone inputs. Wired for low impedance as supplied

• Output Level - Open Circuit Voltage (L) : �56.0dB (1.6 mV) (at 1,000 Hz), 0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL)

• Output Level - Open Circuit Voltage (H) : �34.0 dB (20 mV) (at 1,000 Hz), 0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL)

• Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 (with respect to pin 3)

• Switch : Built-in magnetic reed on/off switch with lockplate. To lock switch in the ON position, remove screw on lockplate and turn lockplate 180 Degree. Reassemble and tighten screw

• Cartridge Shock Mount : Internal rubber vibration-isolator

• Case : Chrome-plated die casting with steel mesh grille

• Net Weight : 10 1/2 oz ((less cable), 298 grams)

Back to Quick Price List